Supermicro H8DC8/H8DCi — Supermicro H8DC8/H8DCi Motherboard User & Service Manual PDF

Chapter 4: BIOS Confi guration nVidia RAID ROM RAID Option ROM This setting is used to Enable or Disable the nVidia ROM. If Enabled, the setting below will appear. Master SATA as RAID This setting is used to Enable or Disable the 3rd Master as RAID. Floppy Confi guration Floppy A Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled, 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ” , and 2.88 MB 3Ѕ". Floppy B Move the cursor to these fi elds via up and down keys to select the fl oppy type. The options are Disabled , 360 KB 5 1/4", 1.2 MB 5 1/4", 720 KB 3Ѕ", 1.44 MB 3Ѕ”, and 2.88 MB 3Ѕ".

Onboard Floppy Controller Use this setting to Enable or Disable the onboard fl oppy controller. PCI/PnP Menu Clear NVRAM Select Yes to clear NVRAM during boot-up. The options are Yes and No . Plug & Play OS Select Yes to allow the OS to confi gure Plug & Play devices. (This is not required to allow AMIBIOS to confi gure all devices in the system. for system boot if your system has an OS that supports Plug & Play.) Select No PCI Latency Timer This option sets the latency of all PCI devices on the PCI bus. Select a value to set the PCI latency in PCI clock cycles. Options are 32, 64 , 96, 128, 160, 192, 224 and 248. 4-5