Super Micro Computer, Inc. H8DCE-HTe — Super Micro H8DCE-HTe Motherboard User & Service Manual PDF

Chapter 4: BIOS Available and Reserved. DMA Channel 0/Channel 1/Channel 3/Channel 5/Channel 6/Channel 7 Select Available to indicate that a specifi c DMA channel is available to be used by a PCI/PnP device. Select Reserved if the DMA channel specifi ed is reserved for a Legacy ISA device. The options are Available and Reserved. Reserved Memory Size This feature specifi es the size of memory block to be reserved for Legacy ISA devices. The options are Disabled , 16K, 32K and 64K. Super IO Confi guration Serial Port1 Address This option specifi es the base I/O port address and Interrupt Request address of serial port 1.

Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to Disabled , the serial port physically becomes unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port address and IRQ 4 for the interrupt address. The options are Disabled, 3F8/IRQ4 , 3E8/IRQ4 and 2E8/IRQ3. Serial Port2 Address This option specifi es the base I/O port address and Interrupt Request address of serial port 2. Select "Disabled" to prevent the serial port from accessing any system resources. When this option is set to "Disabled", the serial port physically becomes unavailable.

Select "2F8/IRQ3" to allow the serial port to use 2F8 as its I/O port address and IRQ 3 for the interrupt address. The options are Disabled, 2F8/IRQ3 , 3E8/IRQ4 and 2E8/IRQ3. Serial Port 2 Mode Tells BIOS which mode to select for serial port 2. The options are Normal , IrDA and ASKIR. Parallel Port Address This option specifi es the I/O address used by the parallel port. Select Disabled to prevent the parallel port from accessing any system resources. When the value of this option is set to Disabled, the printer port becomes unavailable. Select 378 to allow the parallel port to use 378 as its I/O port address. The majority of parallel 4-7