H8DCE-HTe User's Manual Power Down Control Allows DIMMs to power down by deasserting the clock signal when not in use. Options are Auto and Disabled. Memory Ticking Parameters Allows the user to select which CPU Node's timing parameters (memory clock, etc.) to display. Options are CPU Node 0 and CPU Node1. SouthBridge Confi guration Audio CODEC Interface Use this setting to Enable or Disable the internal ACI. CPU Spread Spectrum This setting is used to enable spread spectrum for the CPU. Options are Dis- abled and Center Spread. SATA Spread Spectrum This setting is used to enable spread spectrum for the SATA. Options are Dis- abled and Down Spread.
PCI Express Spread Spectrum This setting is used to enable spread spectrum for the PCI Express. Options are Disabled and Down Spread. Primary Video This setting is used to switch the PCI bus scanning order while searching for the video card. It allows the user to select the type of primary VGA in case of multiple video controllers. Options are Slave PCI-Express and Master PCI-Express . APCI Confi guration Advanced ACPI Confi guration ACPI 2.0 Features "Yes" enables RSDP pointers to 64-bit fi xed system description pages. Op- tions are Yes and No . 4-10