Super Micro Computer, Inc. H8DCE-HTe — Super Micro H8DCE-HTe Motherboard User & Service Manual PDF

Chapter 4: BIOS Node Interleaving Use this setting to Enable or Disable Node Interleaving. ECC Confi guration DRAM ECC Enable DRAM ECC allows hardware to report and correct memory errors automati- cally. Options are Enabled and Disabled. MCA DRAM ECC Logging When Enabled, MCA DRAM ECC logging and reporting is enabled. Options are Enabled and Disabled . ECC Chip Kill Allows the user to enabled ECC Chip kill. Options are Enabled and Disabled . DRAM Scrub Redirect Allows system to correct DRAM ECC errors immediately, even if back- ground scrubbing is on. Options are Enabled and Disabled . DRAM BG Scrub Corrects memory errors so later reads are correct.

Options are Dis- abled and various times in nanoseconds and microseconds. L2 Cache BG Scrub Allows L2 cache RAM to be corrected when idle. Options are Disabled and various times in nanoseconds and microseconds. Data Cache BG Scrub Allows L1 cache RAM to be corrected when idle. Options are Disabled and various times in nanoseconds and microseconds. IOMMU Option Menu IOMMU Mode IOMMU is supported on Linux-based systems to convert 32-bit I/O addresses to 64-bit. Options are AGP Present, Disabled, 32MB, 64MB, 128MB, 256MB, 512MB and 1GB. 4-9