H8DCE-HTe User's Manual CPU0: CPU1 HT Link Width The HT link will run at the width specifi ed in this setting. Options are Auto , 2 bit, 4 bit, 8 bit and 16 bit. CPU0: PCI-X0 HT Link Speed The HT link will run at the speed specifi ed in this setting if it is slower than or equal to the system clock and if the board is capable. Options are Auto , 200 MHz, 400 MHz, 600 MHz, 800 MHz and 1 GHz. CPU0: PCI-X0 HT Link Width The HT link will run at the width specifi ed in this setting. Options are Auto , 2 bit, 4 bit, 8 bit and 16 bit. CPU:
HT_Slot Link Speed (Available if HT slot is populated) The HT slot will run at the speed specifi ed in this setting if it is slower than or equal to the system clock and if the board is capable. Options are Auto , 200 MHz, 400 MHz, 600 MHz, 800 MHz and 1 GHz. CPU: HT_Slot Link Width (Available if HT slot is populated) The HT slot will run at the width specifi ed in this setting. Options are Auto , 2 bit, 4 bit, 8 bit and 16 bit. MPS Confi guration MPS Revision This setting allows the user to select the MPS revision level. The options are 1.1 and 1.4. PCI Express Confi guration Active State PowerManagement Use this setting to Enable or Disable PCI Express L0s and L1 link power states.
AMD PowerNow Confi guration This setting is used to Enable or Disable the AMD PowerNow feature. 4-12