Chapter 4: BIOS SMBIOS Confi guration Smbios Smi Support Enable or Disable SMBIOS wrapper support for PnP function 50h-54h. Remote Access Confi guration Remote Access Allows you to Enable or Disable Remote Access. USB Confi guration This screen will display the module version and all USB enabled devices. USB Controller Support Enable the controller for your USB ports. Options are Disabled, USB 1.1 only and USB 1.1 + USB 2.0 . Legacy USB Support Select "Enabled" to enable the support for USB Legacy. Disable Legacy support if there are no USB devices installed in the system. The options are Disabled, Enabled and Auto. USB 2.0 Controller Mode Select the controller mode for your USB ports.
Options are HiSpeed and FullSpeed. (HiSpeed=480 Mbps, FullSpeed=12 Mbps ) . BIOS EHCI Hand-Off Enable or Disable a workaround for OS's without EHCI hand-off support. System Health Monitor CPU Overheat Temperature Use the "+" and "-" keys to set the CPU temperature threshold to between 65 o and 90 o C. When this threshold is exceeded, the overheat LED on the chas- sis will light up and an alarm will sound. The LED and alarm will turn off once the CPU temperature has dropped to 5 degrees below the threshold set. The default setting is 78 o C . 4-13