Supermicro · H8DCL-6/i(F) · 88 pp.
Supermicro H8DCL-6/i(F) Serverboard User's Manual PDF
Related manuals
Document text
® S UPER H8DCL-i H8DCL-6 H8DCL-iF H8DCL-6F USER'S MANUAL Revision 1.2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com . Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice.
This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license. IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. FCC Statement: Refer to Supermicro's web site for FCC Compliance Information.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate WARNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of California to cause birth defects and other reproductive harm. Manual Revision 1.2 Release Date: March 04, 2014 Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this document.
Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. Copyright © 2014 by Super Micro Computer, Inc. All rights reserved. Printed in the United States of America
Preface Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the H8DCL-6/i(F) serverboards. This series includes the following serverboards and characteristics: The H8DCL-6/i(F) serverboards are based on the AMD® AMD SR5690/SP5100 chipset and all support two AMD Socket C32 type processors with up to 64 GB of ECC/Non-ECC UDIMM or up to 256 GB of ECC RDIMM. Please refer to the motherboard specifi cations pages on our web site for updates on supported processors ( http://www.supermicro.com/aplus/ ). This product is intended to be professionally installed.
Manual Organization Chapter 1 includes a checklist of what should be included in your motherboard box, describes the features, specifi cations and performance of the motherboard and provides detailed information about the chipset. Chapter 2 begins with instructions on handling static-sensitive devices. Read this chapter when installing the processor(s) and memory modules and when installing the motherboard in a chassis. Also refer to this chapter to connect the hard disk drives, the various ports, and the power and reset buttons and the system LEDs.
If you encounter any problems, see Chapter 3 , which describes troubleshooting procedures for the video, the memory and the setup confi guration stored in CMOS. For quick reference, a general FAQ (Frequently Asked Questions) section is provided. Instructions are also included for contacting technical support. In addition, you can visit our web site for more detailed information. Chapter 4 includes an introduction to BIOS and provides detailed information on running the CMOS Setup utility. Appendix A provides BIOS Error Beep Code Messages. Appendix B lists BIOS POST Checkpoint Codes. iii Embeded IPMI Onboard SAS2 H8DCL-i No No H8DCL-6 No Yes H8DCL-iF Yes No H8DCL-6F Yes Yes
Table Of Contents Table of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 Checklist .......................................................................................................... 1-1 1-2 Contacting Supermicro .................................................................................... 1-2 1-3 Serverboard Features ..................................................................................... 1-7 H8DCL-6/i(F) Quick Reference .......................................................................
1-5 1-4 Chipset Overview .......................................................................................... 1-10 AMD AMD SR5690/SP5100 Chipset ............................................................ 1-10 HyperTransport Technology .......................................................................... 1-10 1-5 PC Health Monitoring .................................................................................... 1-10 Onboard Voltage Monitors ............................................................................ 1-10 Fan Status Monitor with Firmware/Software Speed Control .......................
1-10 CPU Overheat/Fan Fail LED and Control ....................................................1-11 1-6 Power Confi guration Settings.........................................................................1-11 Auto-Switching Voltage Regulator for the CPU Core ....................................1-11 Microsoft OnNow ............................................................................................1-11 Slow Blinking LED for Suspend-State Indicator ............................................1-11 BIOS Support for USB Keyboard...................................................................1-11 Main Switch Override Mechanism ................................................................
1-12 1-7 Power Supply ................................................................................................ 1-12 Wake-On-LAN (WOL) ................................................................................... 1-12 1-8 Super I/O ....................................................................................................... 1-13 Chapter 2 Installation 2-1 Standardized Warning Statements ................................................................. 2-1 About Standardized Warning Statements ....................................................... 2-1 Battery Handling ..............................................................................................
2-1 Product Disposal ............................................................................................. 2-3 2-2 Static-Sensitive Devices .................................................................................. 2-4 Precautions ..................................................................................................... 2-4 Unpacking ....................................................................................................... 2-4 2-3 Processor and Heatsink Installation................................................................ 2-5 2-4 Mounting the Serverboard into a Chassis ......................................................
2-7 2-5 Installing Memory ............................................................................................ 2-7 2-6 PCI Expansion Cards .................................................................................... 2-10 DIMM Module Population Confi guration .................................................... 2-9 2-7 I/O Port and Control Panel Connections .......................................................2-11 iv