Supermicro H8DCL-6/i(F) — Supermicro H8DCL-6/i(F) Serverboard User's Manual PDF

Preface Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the H8DCL-6/i(F) serverboards. This series includes the following serverboards and characteristics: The H8DCL-6/i(F) serverboards are based on the AMD® AMD SR5690/SP5100 chipset and all support two AMD Socket C32 type processors with up to 64 GB of ECC/Non-ECC UDIMM or up to 256 GB of ECC RDIMM. Please refer to the motherboard specifi cations pages on our web site for updates on supported processors ( http://www.supermicro.com/aplus/ ). This product is intended to be professionally installed.

Manual Organization Chapter 1 includes a checklist of what should be included in your motherboard box, describes the features, specifi cations and performance of the motherboard and provides detailed information about the chipset. Chapter 2 begins with instructions on handling static-sensitive devices. Read this chapter when installing the processor(s) and memory modules and when installing the motherboard in a chassis. Also refer to this chapter to connect the hard disk drives, the various ports, and the power and reset buttons and the system LEDs.

If you encounter any problems, see Chapter 3 , which describes troubleshooting procedures for the video, the memory and the setup confi guration stored in CMOS. For quick reference, a general FAQ (Frequently Asked Questions) section is provided. Instructions are also included for contacting technical support. In addition, you can visit our web site for more detailed information. Chapter 4 includes an introduction to BIOS and provides detailed information on running the CMOS Setup utility. Appendix A provides BIOS Error Beep Code Messages. Appendix B lists BIOS POST Checkpoint Codes. iii Embeded IPMI Onboard SAS2 H8DCL-i No No H8DCL-6 No Yes H8DCL-iF Yes No H8DCL-6F Yes Yes