H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual Auxiliary Power Connector A 4-pin 12V auxiliary power connector is included to provide power to hard drive disks. See the table below for pin definitions. PW_ON Connector The PW_ON connector is on pins 1 and 2 of JF1. This header should be connected to the chassis power button. See the table below for pin definitions. Reset Connector The reset connector is located on pins 3 and 4 of JF1 and attaches to the reset switch on the computer chassis. See the table below for pin definitions. Overheat/Fan Fail LED (OH) Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide advanced warning of chassis overheating or fan failure.
Refer to the tables below for pin definitions and for LED status indicators. 2-8 Pin# Definition 1 +12V 2 Ground 3 Ground 4 +5V Pin# Definition 1 PW ON _ 2 Ground Pin# Definition 3 Reset 4 Ground Pin# Definition 7 Vcc 8 Control