Chapter 2: Installation NIC2 (LAN2) LED The LED connections for LAN2 are on pins 9 and 10 of JF1. Attach LAN LED cables to display network activity. See the table below for pin definitions. NIC1 (LAN1) LED The LED connections for LAN1 are on pins 11 and 12 of JF1. Attach LAN LED cables to display network activity. See the table below for pin definitions. The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display disk activity (for any hard drives on the system, including SAS, Serial ATA and IDE). See the table below for pin definitions HDD LED Power On LED The Power On LED connector is located on pins 15 and 16 of JF1.
This connection is used to provide LED indication of power being supplied to the system. See the table below for pin definitions. 2-9 State Indication Solid Overheat Blinking Fan Fail Pin# Definition 9 Vcc 10 NIC2 Pin# Definition 11 Vcc 12 NIC1 Pin# Definition 13 Vcc 14 HD Active Pin# Definition 15 5V Stby 16 Control