Chapter 2: Installation Using the nVidia RAID Utility The nVidia RAID Utility program is where you can define the drives you want to include in the RAID array and the mode and type of RAID. Two main windows are shown in the utility. 1. The F REE D ISKS window on the left will list all available drives. Use the arrow keys to select and move drives to the window on the right, which lists all drives that are to become part of the RAID array. 2. Once you have finished selecting the drives and type of RAID you wish to use for your RAID array, press the key. You will be prompted to verify your choice; if you want to continue with your choices, select Y ES . WARNING:
Selecting Yes clears all previous data from the drives you selected to be a part of the array. 3. You are then given the choice of making the RAID array bootable by pressing the the key. After you have finished, press the TRL > and keys simultaneously. Installing the OS and Drivers To install the OS and drivers, do the following: 1. With the Windows OS installation CD in the CD-ROM drive, restart the system. 2. When you see the prompt, hit the key to enter Windows setup. Eventually a blue screen will appear with a message that begins W INDOWS COULD NOT DETERMINE THE TYPE OF ONE OR MORE STORAGE DEVICES . . . 3.
When you see the screen, hit the key to S PECIFY A DDITIONAL D EVICE , then insert the driver diskette you just created into the floppy drive. 4. Highlight M ANUFACTURER S UPPLIED H ARDWARE S UPPORT D ISK and hit the NTER > key. 5. Highlight the first N V IDIA RAID driver shown and press the NTER > key to install it. 6. Soon a similar blue screen will appear again. Again hit the key, then highlight the second item, N F ORCE S TORAGE C ONTROLLER and press the NTER > key, then NTER > again to continue with the Windows setup. 2-11 Installing Drivers The CD that came bundled with the Serverboard contains drivers, some of which must be installed, such as the chipset driver. 1.
After inserting this CD into your CD-ROM drive, the display shown in Figure 2-10 should appear. If this display does not appear, click on the M Y C OMPUTER icon and 2-19