HAWK MV-4000 Quick Start Guide

The Edit view features a large image area with tool icons above and tool parameters below or to the right depending on user preference. When a tool is selected, its specific parameters appear. Tools that have been added are shown in the job list to the left of the image area, below Camera . Image settings can be controlled using the icons in the corners of the image area. Step 6 — Evaluate a Captured Image and Auto Calibrate view after selecting your device. This view allows you to evaluate your first image Auto Calibration button to Exposure , Gain , and Focus as Lighting Mode . Image view, you will view.

This interface allows you to set camera parameters, add machine vision tools to Step 8 — Explore the Interface Consider the following: • • Is the surface matte or shiny? • Is the object curved or flat? • • Is the object moving or stationary? the contrast of everything else. Select a device to start editing a job view. Note: Connect step and 1. dropdown menu. 2. 3. AutoVISION can be found on the Omron Microscan Tools Drive that is packaged with the camera. 1. Follow the prompts to install AutoVISION from the Tools Drive. 2. Download Center at www.microscan.com . Note:

192.168.AA.BB where AA.BB are the last 2 http://[your camera name]:8088 in a is the name of the device – HAWK3204E8 , for example. Step 3 — Mount and Position the Camera • Intel • • • • • • Step 4 — Install AutoVISION Camera / Object Positioning 3 Cordset, Common, M12 12-Pin Socket to M12 12-Pin Plug, 1 m or 61-000162-02 Cordset, Common, M12 12-Pin Socket to M12 12-Pin Plug, 3 m 61-000148-02 4 Cable, Adapter, HAWK MV-4000 to QX-1 61-9000132-01 5 Power Supply, 100-240VAC, +24VDC, M12 12-Pin Socket 97-000012-01 6 Cable, Ethernet, M12 8-Pin Plug to RJ45, X-Code/RJ45 CAT 6A, 1 m, 3 m, or 5 m 61-9000134-01, -02, -03 7 Photo Sensor, VIS, NPN, Light On/Dark On 99- 9 0000 16 -0 1 1.

Connect the Ethernet cable ( 6 ) from the 100/1000 Base-T connector on the camera ( 1 ) to the network. 2. Connect the power supply cable ( 5 ) to “3” on the QX-1 ( 2 ). 3. Connect the photo sensor ( 7 ) to “T” on the QX-1. 4. Connect the “CAMERA” end of the adapter cable ( 4 ) to the camera, and the “POWER” end to the “Common” cable ( 3 ). Then connect the “Common” cable to “2” on the QX-1. 5. Connect the Smart Series cable ( 8 or 9 ) to your choice of Smart Series light and to “1” on the QX-1. 6. Plug in the power supply. The list of hardware below can be used in a variety of applications and configurations.

Consult with Omron Microscan for further information about which items are most appropriate for your application. Item Description Part Number 1 HAWK MV-4000 Smart Camera 8X1X-XXX0-0PPP 2 QX-1 Interface Device 98-000103-02 8 QX Cordset, Smart Series Light to QX-1, Continuous Power 61-000204-01 9 QX Cordset, Smart Series Light to QX-1, Strobe, NPN 61-000218-01 10 NERLITE Smart Series Illuminator NER-011660XXXG Quick Start Guide HAWK MV-4000 Smart Camera 84-9111025-02 Rev D Copyright ©20 21 Omron Microscan Systems, Inc. Note: Additional cables available in the Omron Microscan Product Pricing Catalog.

61-9000132-01 CAMERA End POWER End Step 2 — Connect the System Ethernet Configuration (Standard HAWK MV-4000) Step 1 — Check Hardware 10 1 2 4 3 7 6 5 8 or 9 Item De scription Part Number 1 HA WK MV-4000 Smart Camera 8X1X-XXX0-0PPP 2 Q X-1 Interface Device 98-000103-02 Co 3 Co rdset, Common, M12 12-Pin Socket to M12 12-Pin Plug, 1 m or 61-000162-02 rdset, Common, M12 12-Pin Socket to M12 12-Pin Plug, 3 m 61-000148-02 4 Ca ble, Adapter, HAWK MV-4000 to QX-1 61-9000132-01 5 Po wer Supply, 100-240VAC, +24VDC, M12 12-Pin Socket 97-000012-01 6 Ca ble, Ethernet, M12 8-Pin Plug to RJ45, X-Code/RJ45 CAT 6A, 1 m, 3 m, or 5 m 61-9000134-01, -02, -03 7 Ph oto Sensor, VIS, NPN, Light On/Dark On 99-9000016-01 8 Q X Cordset, Smart Series Light to QX-1, Continuous Power 61-000204-01 9 Q X Cordset, Smart Series Light to QX-1, Strobe, NPN 61-000218-01 10 NE RLITE Smart Series Illuminator NER-011660XXXG Note:

Additional cables available in the Omron Microscan Product Pricing Catalog. 10 6 4 3 8 or 9 2 5 7 1 CAM End POW End Note: The HAWK MV-4000’s default IP address is: 192.168.AA.BB where AA.BB are the last 2 octets in decimal of the device MAC Address with subnet Class B 255.255.0.0. Set your PC to the same subnet (192.168.0.1, for example). To access the camera’s “health status”, enter the address http://[your camera name]:8088 in a browser, where [your camera name] is the name of the device – HAWK3204E8, for example.

Page 1

100 = AutoVISION Sensor; 101 = AutoVISION; 102 = AutoVISION + Visionscape; 103 = AutoVISION + Verification /OCV ; 104 = AutoVISION + Visionscape + Verification /OCV See the HAWK MV-4000 Smart Camera Guide for a full list of accessories. All accessories are available in the Omron Product Pricing Catalog.

1 = VGA, Mono; 2 = 1.3 MP, Mono; 3 = 2 MP, Mono; 4 = 5 MP, Mono; 5 = VGA, Color; 6 = 1.3 MP, Color; 7 = 2 MP, Color; 8 = 5 MP, Color VGA/USB Connector M12 12-Pin Plug 10/1000 Base-T Connector M12 8-Pin X-Coded Socket HAWK MV-4000-03, -03C, -13, -13C, -20, -20C, -50, -50C Operating Voltage for the HAWK MV-4000 under Testing Conditions 24V Rated Current 600 mA Operating Voltage Tolerance ±10% See the HAWK MV-4000 Smart Camera Guide for full electrical specifications. 0 = No Lens Cover; 1 = 50 mm Lens Cover; 2 = 70 mm Lens Cover 0 = No Lens; 1 = 2/3” Standard Def.; 2 = 2/3” High Def.; 3 = 1” High Def.

Power Requirements and Pin Assignments Standard-Fidelity Lenses for 0.3 Megapixel, 1.3 Megapixel, and 2.0 Megapixel Sensors 00 = No Lens; XX = Focal Length (mm) (See lens table above.) High-Fidelity Lenses for 0.3 Megapixel, 1.3 Megapixel, and 2.0 Megapixel Sensors HAWK MV-4000 Part Number Structure Output Common Digital I/O and Power Connector – M12 12-Pin Socket 98-9000167-01 Kit, Lens, C-Mount, F1.2/6 mm, 1.5 MP, 2/3" 98-9000168-01 Kit, Lens, C-Mount, F1.4/9 mm, 1.5 MP, 2/3" Kit, Lens, C-Mount, F1.4/12.5 mm, 1.5 MP, 2/3" Kit, Lens, C-Mount, F1.4/16 mm, 1.5 MP, 2/3" Kit, Lens, C-Mount, F1.4/25 mm, 1.5 MP, 2/3" Kit, Lens, C-Mount, F1.6/35 mm, 1.5 MP, 2/3" Kit, Lens, C-Mount, F1.6/8 mm, 5 MP, 2/3" Kit, Lens, C-Mount, F1.6/12 mm, 5 MP, 2/3" Kit, Lens, C-Mount, F1.6/16 mm, 5 MP, 2/3" Kit, Lens, C-Mount, F1.6/25 mm, 5 MP, 2/3" Kit, Lens, C-Mount, F1.9/35 mm, 5 MP, 2/3" Kit, Lens, C-Mount, F1.9/6 mm, 5 MP, 2/3" Kit, Lens, C-Mount, F1.4/12.5 mm, 9 MP, 1" Kit, Lens, C-Mount, F1.4/16 mm, 9 MP, 1" Kit, Lens, C-Mount, F1.4/25 mm, 9 MP, 1" Kit, Lens, C-Mount, F1.4/35 mm, 9 MP, 1" HAWK MV-4000 part numbers follow the format 8ABS-LFFA-LPPP .

Input 1 Output 1 Analog Output Input 2 Input 3 High-Fidelity Lenses for 5 Megapixel 1” Sensors Output 2 HAWK MV-4000 Lenses 1 = Machine Vision HAWK MV-4000 Smart Camera Output 3 0 0 Input Common Power Trigger Ground When all job parameters are set, click on the Run step at the top of the interface. The software will download the vision job just created to the camera and will begin the inspection . Inspection results and the list of active tools are shown at the right of the image view. That information can also be moved below the image area by clicking the orientation buttons above the inspection results area. Note:

For descriptions of more advanced functionality, such as setting Inspection Outputs or using the Locate Tool and Decode Tool ’s Dynamic Locate functionality to track multiple tools from image to image, see the help documentation in AutoVISION software. Measure: Measure the distance between the jaws of the caliper gauges at left. Decode Tool, OCR Tool, Match Strings Tool, String Format Tool Count: Count the circles on the dice shown at right. LOT 123456 DATE 2020-09-15 Step 12 — Run the Job VISION SIMPLIFIED Measure Tool, Count Tool Test Jobs Once you have configured the tools as desired, use the arrow icons in the Job area to try the job you have just created. Note:

Most jobs will inspect multiple captured images. If only one image is being inspected, the effect of the arrow icons will not be evident. 1. Click on the Camera box to the left of the image area. 2. In the camera parameters below the image area, select the desired type of Trigger , Trigger Polarity , Photometry (Exposure and Gain), and Lighting . 1. Click on the Decode Tool or drag it onto the image area. 2. Use the anchor points at the corners of the region of interest to form a box around the Data Matrix symbol. Leave plenty of space on each side of the symbol. 3. Now add a second Decode Tool and do the same for the 1D symbol below the Data Matrix symbol. 4.

Finally, add an OCR Tool and drag the region of interest around the area of the image where “123456” is printed. Try Out Job Once Try Out Job in Loop Step 9 — Set Camera Parameters Step 10 — Add Tools to the Job Copyright © 2021 Omron Microscan Systems, Inc.

Step 11 — Try Out the Job HAWK MV-4000-03, -03C, -13, -13C, -20, -20C, -50, -50C Operating Voltage for the HAWK MV-4000 under Testing Conditions 24V Rated Current 600 mA Operating Voltage Tolerance ±10% LOT 123456 DATE 2020-09-15 Standard-Fidelity Lenses for 0.3 Megapixel, 1.3 Megapixel, and 2.0 Megapixel Sensors 98-9000167-01 Kit, Lens, C-Mount, F1.2/6 mm, 1.5 MP, 2/3" 98-9000168-01 Kit, Lens, C-Mount, F1.4/9 mm, 1.5 MP, 2/3" 98-9000169-01 Kit, Lens, C-Mount, F1.4/12.5 mm, 1.5 MP, 2/3" 98-9000170-01 Kit, Lens, C-Mount, F1.4/16 mm, 1.5 MP, 2/3" 98-9000171-01 Kit, Lens, C-Mount, F1.4/25 mm, 1.5 MP, 2/3" 98-9000172-01 Kit, Lens, C-Mount, F1.6/35 mm, 1.5 MP, 2/3" High-Fidelity Lenses for 0.3 Megapixel, 1.3 Megapixel, and 2.0 Megapixel Sensors 98-9000165-01 Kit, Lens, C-Mount, F1.6/8 mm, 5 MP, 2/3" 98-9000166-01 Kit, Lens, C-Mount, F1.6/12 mm, 5 MP, 2/3" 98-9000154-01 Kit, Lens, C-Mount, F1.6/16 mm, 5 MP, 2/3" 98-9000164-01 Kit, Lens, C-Mount, F1.6/25 mm, 5 MP, 2/3" 98-9000163-01 Kit, Lens, C-Mount, F1.9/35 mm, 5 MP, 2/3" 98-9000192-01 Kit, Lens, C-Mount, F1.9/6 mm, 5 MP, 2/3" High-Fidelity Lenses for 5 Megapixel 1” Sensors 98-9000174-01 Kit, Lens, C-Mount, F1.4/12.5 mm, 9 MP, 1" 98-9000175-01 Kit, Lens, C-Mount, F1.4/16 mm, 9 MP, 1" 98-9000176-01 Kit, Lens, C-Mount, F1.4/25 mm, 9 MP, 1" 98-9000177-01 Kit, Lens, C-Mount, F1.4/35 mm, 9 MP, 1" HAWK MV-4000 part numbers follow the format 8ABS-LFFA-LPPP.

8 = HAWK MV-4000 Smart Camera (A) Model 0 = No Lens Cover; 1 = 50 mm Lens Cover; 2 = 70 mm Lens Cover (B) Software 1 = Machine Vision (S) Sensor Type 1 = VGA, Mono; 2 = 1.3 MP, Mono; 3 = 2 MP, Mono; 4 = 5 MP, Mono; 5 = VGA, Color; 6 = 1.3 MP, Color; 7 = 2 MP, Color; 8 = 5 MP, Color (L) Lens 0 = No Lens; 1 = 2/3” Standard Def.; 2 = 2/3” High Def.; 3 = 1” High Def. (FF) Lens Focal Length 00 = No Lens; XX = Focal Length (mm) (See lens table above.) (A) Accessories 0 (L) Lighting 0 (PPP) License 100 = AutoVISION Sensor; 101 = AutoVISION; 102 = AutoVISION + Visionscape; 103 = AutoVISION + Verification/OCV; 104 = AutoVISION + Visionscape + Verification/OCV

Page 2