omron — APPENDIX F Serial Commands

F Serial Commands HELP Returns a list of all serial commands showing correct syntax and functionality descriptions. INFO [tagname|service] Gets information about a tag or service. INFO with no arguments gets a list of services. INFO gets a list of tags in that service. INFO gets attributes of the tag as well as a list of subtags. The AVP service allows retrieval of step and datum information from the job tree using forward slash ‘ / ’ in the symbolic name path. INFO avp/insp1/snapshot1/status paths are not case-sensitive and do not need to be fully qualified if unique. INFO avp/snapshot1/status will return the same result if there is only one inspection.

When issued against a step, INFO avp/snapshot1 returns properties of the step, a list of child datums, and a list of child steps. Child steps are indicated by a trailing forward slash. JOBBOOT [-slot=] Sets bootup job slot n (RS-232 only). JOBDELETE {[-slot=]n|-all} Deletes job in slot n , or all jobs if -all . Important: Does not delete the current job loaded in camera memory. JOBDOWNLOAD [-size=value] [-c] Important: JOBDOWNLOAD only supports FTP on the HAWK MV-4000, as with the GETIMAGE command. Downloads a .avz job file via the specified transfer method (ymodem supported only over RS-232; FTP supported only over network connection).

The ymodem transfer method only requires that the user send the .avz file via the ymodem protocol over RS-232, and the job will load automatically after the transfer is complete. The FTP transfer method requires the user to perform the following steps to load the job: • JOBDOWNLOAD: -transfer=ftp [-size=avpsizeinbytes] Pre-creates a fixed-size /streamd0 RAMdisk to receive the .avz over FTP. If size is omitted, the default RAM disk size is used to create /streamd0. The size of /streamd0 is limited to (available contiguous RAM – minimum target contiguous RAM) / 2. • User FTPs the job to /streamd0 • JOBLOAD:

-mem -r Loads .avz from /streamd0 into RAM, deletes the RAMDisk /streamd0, and optionally starts the job (if -r is specified). HAWK MV-4000 Smart Camera Guide F-5