G Back Up / Restore / Capture the OS Image with Omron Microscan Rescue Utility Operating System Recovery Copy Omron Microscan Rescue Tool to USB Storage Device Omron Microscan recommends that you create a USB storage device for rescue in case the default configuration on your hard disk drive is damaged. This operation allows you to format a USB storage device used to restore the Operating System to the Omron Microscan Factory Image or customized image for the Omron Microscan HAWK unit. To do so, you need an USB storage device with at least 16GB free. Warning: All data on the USB storage device will be erased.
To create a USB storage device to restore one or more Omron Microscan HAWK units, do the following: 1. Access the Omron Microscan Rescue Utility (see the Access Omron Microscan Rescue Utility section). 2. Accept the License Agreement . 3. Select the Copy Omron Microscan Rescue Tool to USB Storage Device option from the menu. 4. Follow all on-screen instructions. Note that you must provide the Omron Microscan Factory Image or your customized image. For Omron Microscan Factory Image: Insert the Omron Microscan USB KEY corresponding to your OS version into a USB hub attached to your HAWK MV-4000 unit. Browse to location \Ximage . For your Customized Image:
Insert your source files ( W10x64HAWK.wim file) into the USB port, browse to the location of the files. 5. When this operation successfully completes, use this USB storage device to restore other units. HAWK MV-4000 Smart Camera Guide G-19