:CALCulate:LIMit:RESistance:MODE This command is used to set the resistor mode. Command grammar :CALCulate:LIMit:RESistance:MODE Exemplary example :CALCulate:LIMit:RESistance:MODE HL Query command :CALCulate:LIMit:RESistance:MODE? Return parameter HL| REF :CALCulate:LIMit:VOLTage:MODE This command is used to set the voltage comparator mode. Command grammar :CALCulate:LIMit:VOLTage:MODE Exemplary example :CALCulate:LIMit:VOLTage:MODE HL Query command :CALCulate:LIMit:VOLTage:MODE? Return parameter HL| REF :CALCulate:LIMit:RESistance:UPPer This command is used to set the resistance of the resistor comparator.
Command grammar :CALCulate:LIMit:RESistance:UPPer - 99999> Exemplary example :CALCulate:LIMit:RESistance:UPPer 20200 (When the current instrument is 3Ω, the upper limit value is set to 2.0200 Ω; if the resistance of the current instrument is 30Ω, the upper limit value is set to 20.200Ω) Query command :CALCulate:LIMit:RESistance:UPPer? Return parameter 20200