:CALCulate:LIMit:RESistance:LOWer This command is used to set the lower limit of the resistor comparator. Command grammar :CALCulate:LIMit:RESistance:LOWer - 99999> Exemplary example :CALCulate:LIMit:RESistance:LOWer 10100 (When the resistance of the current instrument is 3Ω, the upper limit value is set to 1.0100Ω; if the resistance of the current instrument is 30Ω, the upper limit value is set to 10.100Ω) Query command :CALCulate:LIMit:RESistance:LOWer? Return parameter 10100 :CALCulate:LIMit:RESistance:REFerence This command is used to set the benchmark value of the resistor comparator. Command grammar:
:CALCulate:LIMit:RESistance:REFerence - 99999> Exemplary example :CALCulate:LIMit:RESistance:REFerence 10000 (When the current instrument is 3Ω, the upper limit value is set to 1.0000 Ω; if the resistance of the current instrument is 30Ω, the upper limit value is set to 10.000Ω) Query command :CALCulate:LIMit:RESistance:REFerence? Return parameter 10000 :CALCulate:LIMit:RESistance:PERCent This command is used to set the setting of the resistance range. Command grammar :CALCulate:LIMit:RESistance:PERCent - 99.99>