Command system EN Set the oscillation time for OSK modulation. Argument Instructions None Return format Return the rate value as a scientific count. Example SOURce1: MOD: OSKey: 0.0002 TIME /* Set the oscillation time for channel 1 OSK modulation to 200us */ 3.17 OUTPut subsystem The OUTPut subsystem controls the front panel channel output. OUTPut The front panel channel outputs the connector status. 3.17.1 OUTPut Command format OUTPut ON|OFF OUTPut ? Function description Enable or disable the output of the front panel [Output1] or [Output2] connectors. Argument Instructions ⚫ The front panel channel output key will light up when output is enabled.
⚫ OUTPut changes the status of the channel output connector by switching the output relay. Return format Return ON or OFF. HDG300C Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 46 Name Range Default value TIME 8ns to 4.99975ms 100us Name Range Default value ON|OFF OFF