Command system EN Function description Set DC offset voltage. Argument Instructions ⚫ The following shows the relationship between the offset voltage and the output amplitude. |Voffset| ⚫ Set up high level and low level will also set the waveform amplitude and deviation. For example, if setting the high level to +2 V and the low level to -3 V, an amplitude of 5 Vpp and the offset of -500 mV will be produced. Return format + 1.0000000000000E-01. Example SOURce1: VOLTage OFFSet of 0.1 /* Set the offset voltage of channel 1 to 100 mV */ HDG300C Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 68 Name Range Default value - 10 to + 10 v 0V