Modulation EN ⚫ Use the numeric keypad or direction keys and knob to input the desired rate value. ⚫ The rate range is from 2mHz to 1MHz and the default is 100Hz. Note: This menu will be grayed out and disabled when the external modulation source is selected. 8.12.6 Oscillate Time Oscillate time is the oscillation period of internal crystal oscillator. The settable range of the oscillate time is related to the OSK rate currently selected. Press [Mod] > OscTime softkey and use the numeric keypad or direction keys and knob to input the desired time. The default range is from 8ns to 4.99975ms. 8.13 PWM Modulation A modulated waveform consists of a carrier waveform and a modulating waveform.
In PWM, the pulse width of the carrier waveform varies with the voltage level of the modulating waveform. 8.13.1 Select PWM Modulation PWM is only available for the Square waveform. Press [Wave] > Square softkey, and then press [Mod] > Type > PWM softkey to enable the PWM function. ⚫ If the Square function has not been selected as carrier waveform, PWM in [Mod] > Type menu is unavailable. ⚫ When Mod is enabled, Sweep or Burst will be automatically disabled (if enabled ⚫ After PWM is enabled, the instrument will generate PWM waveform with the currently). currently specified carrier and modulating waveforms. 8.13.2 Carrier Waveform Shape PWM is only available for the Square waveform.
Press [Wave] > Square . 8.13.3 Carrier Waveform Duty Press [Wave] > Square softkey to select square as carrier waveform. Press [Setting] > Duty softkey, then input the required value through the numeric keypad or knob. HDG3000C User manual Copyright © Qingdao Hantek Electronics Co., LTD 56