Hantek — 11 Counter

Counter EN 11 Counter The generator provides a counter which can measure various parameters (such as frequency, period, duty cycle, positive pulse width and negative pulse width) of external input signal. Press [Utility] > Counter softkey on the front panel to enable counter function. Input the singal to the Counter connector on the rear panel measure. Press Exit softkey or any other key to exit the counter. Press Gate Time softkey and use the direction keys and the knob to modify the current value. The default value is 1s and the settable range is 10ms to 16s. Figure 11.1 Counter HDG3000C User manual Copyright © Qingdao Hantek Electronics Co., LTD 68