Store EN 12 Store The instrument allows the user to store the current settings state of the instrument in internal or external storage and recall it when needed. 12.1 Store System The instrument provides an internal memory (home disk) and an external memory (USB disk). Home disk: Users can save the instrument settings state to this disk in.pho format. And the file also can be recalled. USB disk: Available when the instrument detects external storage (front USB port). Users can save the instrument settings state to external storage in.pho format. The state files .pho and arbitrary waveform files .hwf in the external memory can be recalled.
The instrument settings state file includes waveform basic parameters, Mod/Sweep/Burst parameters and counter parameters. Press [Utility] > Store softkey to open the store interface, as shown in the figure below. Figure 12.1 Store Interface Note: The instrument can only identify filenames consist of English letters, number and underscore. If other characters are used to name the file or folder, the name might be displayed in the store and recall interface abnormally. 12.2 File Operation Press [Utility] > Store softkey to enter File System, users can perform a series of Copyright © Qingdao Hantek Electronics Co., LTD HDG3000C User manual 69