Hengstler 225 Revolution, Length or Stroke Counter Datasheet (EN)

email: sales@impulseautomation.co.uk web: www.impulseautomation.co.uk Revolution, Length, Stroke Counters Type 225 Approved for length counting by the PTB (German Federal Insti- tute fьr Physics andTechnology) 6-digit display Large digits, 6.5 mm high Button reset Counter with suspension device Adjustable counterweight 6-digit display m/dm or m/cm Button reset TECHNICAL DATA Display 6-digit Digit height 6.5 mm Base plate Zinc plated sheet steel Case die-cast metal Cover plastic (ASB), grey Weight approx. 750 g Counter with suspension device and downward weight approx. 2.400 kp. Downward weight can be shifted in order to regulate contact pressure Counting mode + (-), stroke counter:

+ Transmission ratio 1:1, length counter 1:5 or 1:50 Max. speed 10000 digits/min, stroke counter 800 strokes/min Torque 1.2 Ncm, stroke counter 8.0 Ncm Actuating angle min. 38°, max. 55° (stroke counter only) Reset button reset, secured against unauthorized operation Don’t push the reset pushbutton during the process DIMENSIONS Dimensions in mm Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Doc No: TTCC225 Rev:

001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 18-11-19 1 of 2

Стр. 1

Type 225 Technical data DIMENSIONS Counter with suspension device Dimensions in mm Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. ORDER INFORMATION Actu- Se ation rot nse of Indication Transm. ratio Transm. ratio Transm. ratio Transm.

ration ation 1:1 1:5 1:10 1:50 Revolution counter Length counter Length counter with suspension device Stroke counter Ordering code Ordering code Ordering code Ordering code 1 Bz 999 999 0 225 001 – 0 225 021 – 1 Bw 999 999 0 225 002 – 0 225 022 – 1 Bz 99 999,9 m/dm – 0 225 003 m/dm - 0 225 007 m/cm 1 Bw 99 999,9 m/dm – 0 225 004 m/dm - 0 225 008 m/cm 1 Bz 99 999,9 m/dm – 0 225 501 m/dm - 0 225 505 m/cm 1 Bw 99 999,9 m/dm – 0 225 502 m/dm - 0 225 506 m/cm 1 Bz 999 999 0 225 301 – – - 1 Bw 999 999 0 225 302 – – - Stroke lever Ordering code 0 600 005 For other stroke levers see accessories Panel frame Ordering code 1 250 056 See accessories for description * on request For measuring wheel see accessories, they are not included in normal delivery Doc No:

TTCC225 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 18-11-19 2 of 2

Стр. 2