HP — Removing the back panel

Hardware Components Back Panel Required Tools • #2 phillips screwdriver • Grounding strap Hardware • 8-32 x 3/8” phillips screw (x3) • 4-0.7 x 10 mm screw (x4) Removing the back panel 1. Remove the lower housing. See “Removing the lower housing assembly” on page 36 . 2. Using a #2 screwdriver, remove 2 mounting screws that attach the wastewater drain components to the back panel. See Figure 18 . 3. Using a #2 screwdriver, remove 2 mounting screws that attach the water inlet components to the back panel. Figure 18: Back panel screw location Remove 2 mounting screws Remove 2 mounting screws 39