HP — Major Codes with Minor Codes

Starting Up Failed Minor Errors (15.XX) Controller Load Failed Minor Errors (17.XX) Temperature Failed to Regulate Minor Errors (18.XX) -103 Code Description Corrective Actions 15,01 Startup state activation failed 15,02 Timeout period expired while starting up Software use only 1. See CFG file for additional error details. 2. Replacement controller board or hard drive is gendered incorrectly. 3. If printer is in Dynamic Mode: a. Issue may be a network timeout due to improper DHCP settings on the network. Verify by looking at CFG, if code reads: - MASTER logger: Punching nameserver xxx.xxx.xxx.xxx through the firewall. b. If using printer firmware version 2230 try workaround.

Contact CS for workaround instructions. c. Upgrade printer firmware to a version newer than 2230. 4. Material Bay Connection timeout. Refer to error code 14,139. Code Description Corrective Actions 17,01 LG COMMAND Failed on Controller _ Software use only. 17,02 LG COMMAND Timeout _ Software use only.