HP — Removing the hard drive

Hard Drive Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver. • Phillips screwdriver Hardware • 6-32 x 1 ⁄ 4 ” Phillips pan head screws (x8) Removing the hard drive 1. Open the electronics bay. See “Opening the electronics bay” on page 171 2. Touch the metal plate of the electronics bay cover to discharge any static electricity. 3. Disconnect the power input cable by pressing the metal tab in and pull- ing down. See Figure 104. Figure 104: Hard drive power cable location Disconnect the power input cable 4. Disconnect the SATA cable by pressing the metal tab in and pulling down. See Figure 105. -191