HP — Removing the head board

Head Board Required tools • 5 ⁄ 16 ” nut driver or standard screwdriver • 1 ⁄ 4 ” nut driver Hardware • 10-32 x 3 ⁄ 8 ” slotted screws (x7) • 6-32 x 1 ⁄ 4 ” slotted screws (x6) Removing the head board 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the right side access panel mounting screws and remove the panel. See Figure 168. Figure 168: Right side access panel mounting screw locations Remove the 7 mounting screws. 4. Remove the head cover by pressing the tabs and pulling the cover out- ward. See Figure 169. -233