HP — Removing the umbilical hose

Figure 185: Right side access cover mounting screw locations Remove the 7 mounting screws. 5. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, loosen the umbilical hose clamp. See Figure 186. 6. Disconnect the umbilical hose from the head cooling fan and remove the hose clamp. See Figure 186. Figure 186: Umbilical hose clamp location Loosen the clamp screw and disconnect the hose 7. Remove the head cover by pressing the tabs in and pulling outward. See Figure 187. -242