HP — Removing the umbilical hose

Figure 189: Material tube and retaining ring locations Press down on the retaining rings Lift the material tubes out of the rings 10. Cut the wire tie from around the umbilical hose. See Figure 190. Figure 190: Umbilical hose wire tie location Cut and remove the wire tie 11. Remove the energy chain mounting screws from the translator with a 5 ⁄ 32 ” allen wrench. See Figure 191. Figure 191: Remove the energy chain mounting screws Remove the 2 mounting screws 12. Straighten the energy chain and feed the umbilical hose through to remove. -244