HP — Removing the X motor

Figure 200: Left side access panel mounting screw locations Remove the 7 mounting screws. 4. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 7 right side access panel mounting screws and remove the right side access panel. See Figure 201. Figure 201: Right side access panel mounting screw locations Remove the 7 mounting screws. 5. Using a 1 ⁄ 2 ” box wrench, remove the X belt tension adjuster by loosen- ing the inside nut and then backing the bolt out of the mount. See Figure 202. 6. Remove the tensioning fork and pulley from the X motor belt. -253