HP — Removing the XY table

Hardware • Wire tie • 10-32 x 3 ⁄ 8 ” slotted screws (x14) • 10-32 x 1 ⁄ 2 ” slotted screws (x4) • 10-32 x 1 ⁄ 2 ” socket head cap screws (x4) • 8-32 x 1 ⁄ 2 ” socket head cap screws (x4) • 1 ⁄ 4 - 20 x 1 ⁄ 2 ” button head cap screws (x2) Removing the XY table 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Remove the front panel. See “Removing the front panel” on page 166 4. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the left side access panel mounting screws and remove the left side access panel. See Figure 245. -282