HP — Removing the XY table

Figure 245: Left side access panel mounting screw locations Remove the 7 mounting screws. 5. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the right side access panel mounting screws and remove the right side access panel. See Figure 246. Figure 246: Right side access panel mounting screw locations Remove the 7 mounting screws. 6. Remove the toggle head assembly. See “Removing the toggle head assembly” on page 212 8. Remove the TC Amp board. See “Removing the TC Amp board” on page 239 7. Remove the head board. See “Removing the head board” on page 233 9. Cut the wire tie from the umbilical hose. See Figure 247. -283