HP — Removing the XY table

Figure 251: X motor cable connector location Disconnect X motor cable 16. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 2 X energy chain mounting bracket mounting screws and set bracket to the side. See Figure 252. Figure 252: X motor energy chain mounting bracket mounting screw locations Remove the 2 mounting screws 17. Using a 5 ⁄ 16 ” box wrench, remove the outer Y belt retaining clip mount- ing screws from the left side. See Figure 253. 18. Using a 5 ⁄ 16 ” box wrench, loosen, but do not remove, the inner Y belt retaining clip mounting screws from the left side. See Figure 253. 19. Pull the left side Y belt out from the retaining clip. -286