Figure 259: Left side front Y guide rod mounting screw location Remove the left front Y guide rod mounting screw 29. Using a 5 ⁄ 32 ” allen wrench, remove the left side rear Y guide rod mount- ing screw. See Figure 260. Figure 260: Left side rear Y guide rod mounting screw location Remove the left rear Y guide rod mounting screw 30. Lift the front of the left Y guide rod upward until it is near the top of the frame. 31. Rotate the left side Y guide rod towards the center of the printer and lower the guide rod. 32. Pull the left side Y guide rod out towards the door opening. 33. Angle the rest of the XY table out through the chamber door to remove from the printer. -290