HP — Removing the right side chamber fan

Chamber Fans Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver. • 5 ⁄ 16 ” box wrench Hardware • 10-32 x 3 ⁄ 8 ” slotted screws (x8) • 8-32 x 1 ⁄ 2 ” slotted screws (x4) Removing the right side chamber fan 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 4 mounting screws from the right side heater panel. See Figure 284. Figure 284: Right side heater panel mounting screw locations Remove the 4 mounting screws 4. Using a 5 ⁄ 16 ” box wrench, remove the 2 chamber fan mounting screws. See Figure 285. Figure 285:

Right side chamber fan mounting screw locations -307