Figure 282: Z EOT sensor cable location Disconnect the Z EOT cable 4. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, remove the mounting screw. See Figure 283. Figure 283: Remove the mounting screw Remove the mounting screw 5. Remove the Z EOT Sensor. Installing the Z EOT sensor 1. Align the Z EOT sensor with the mounting hole. 2. Using a 1 ⁄ 4 ” nut driver or standard screwdriver, reinstall the mounting screw. 3. Reconnect the Z EOT sensor cable. 4. Close the chamber door. -306