HP — Removing the right side heater

Chamber Heaters Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver. • 3 ⁄ 8 ” nut driver. Hardware • 10-32 x 3 ⁄ 8 ” slotted screws (x8) • 10-32 x 1 ⁄ 2 ” slotted screws (x4) • 10-32 x 1 ⁄ 8 ” nut (x4) Removing the right side heater 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 4 mounting screws and remove the heater panel. See Figure 288. -310