HP — Removing the right side heater

Figure 288: Right side heater panel mounting screw locations Remove the 4 mounting screws 4. Remove the black power wire from the right mounting post with a 3 ⁄ 8 ” nut driver. See Figure 289. 5. Remove the white power wire from the left mounting post with a 3 ⁄ 8 ” nut driver. See Figure 289. Figure 289: Power wire locations Remove the white power wire Remove the black power wire 6. Remove the left and right mounting screws with a 5 ⁄ 16 ” nut driver or stan- dard screwdriver. Do not lose the insulating washers as they are need for reinstallation. See Figure 290. -311