HP — Removing the left side heater

Figure 290: Right side heater mounting screw locations Remove the mounting screws 7. Remove the heater. Installing the right side heater 1. Align the heater with the mounting posts. 2. Insert the insulating washers and reinstall the mounting screws using a 5 ⁄ 16 ” nut driver or standard screwdriver. 3. Reinstall the white power wire on the left mounting post using a 3 ⁄ 8 ” nut driver. 4. Reinstall the black power wire on the right mounting post using a 3 ⁄ 8 ” nut driver. 5. Align the heater panel with the mounting holes. 6. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, reinstall the 4 heater panel mounting screws. 7. Install the side panels.

See “Installing the side panels” on page 164 8. Install the top panel. See “Installing the top panel” on page 162 Removing the left side heater 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 4 mounting screws and remove the heater panel. See Figure 291. -312