HP — Installing the left side heater

Figure 293: Left side heater mounting screw locations Remove the mounting screws 7. Remove the heater. Installing the left side heater 1. Align the heater with the mounting posts. 2. Insert the insulating washers and reinstall the mounting screws using a 5 ⁄ 16 ” nut driver or standard screwdriver. 3. Reinstall the black power wire on the left mounting post using a 3 ⁄ 8 ” nut driver. 4. Reinstall the white power wire on the right mounting post using a 3 ⁄ 8 ” nut driver. 5. Align the heater panel with the mounting holes. 6. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, reinstall the 4 heater panel mounting screws. 7. Install the side panels.

See “Installing the side panels” on page 164 8. Install the top panel. See “Installing the top panel” on page 162 -314