HP — Removing the right side thermal fuse

Thermal Fuses Required Tools • 5 ⁄ 16 ” nut driver or standard screwdriver. Hardware • 10-32 x 3 ⁄ 8 ” slotted screws (x8) • 4-40 x 1 ⁄ 4 ” slotted screws (x4) Removing the right side thermal fuse 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 4 mounting screws and remove the right side heater panel. See Figure 294. Figure 294: Right side heater panel mounting screw locations Remove the 4 mounting screws 4. Disconnect the RTH1 and RTH2 spade connectors by pulling outward. See Figure 295. -315