Figure 295: RTH1 and RTH2 spade connector locations Disconnect RTH1 Disconnect RTH2 5. Using a standard screwdriver, remove the 2 mounting screws. See Figure 296. Figure 296: Right side thermal fuse mounting screw locations Remove the mounting screws 6. Remove the thermal fuse. Installing the right side thermal fuse 1. Align the thermal fuse with the mounting holes. 2. Using a standard screwdriver, reinstall the mounting screws. 3. Reconnect RTH1 and RTH2 spade connectors. 4. Align the heater panel with the 4 mounting screws. 5. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, reinstall the 4 mounting screws. 6. Reinstall the side panels. See “Installing the side panels” on page 164 7.
Reinstall the top panel. See “Installing the top panel” on page 162 -316