Removing the left side thermal fuse 1. Remove the top panel. See “Removing the top panel” on page 161 2. Remove the side panels. See “Removing the side panels” on page 162 3. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 4 mounting screws from the left side heater panel and remove the heater panel. See Figure 297. Figure 297: Left side heater panel mounting screw locations Remove the mounting screws 4. Disconnect the LTH1 and LTH2 spade connectors by pulling outward. See Figure 298. Figure 298: LTH1 and LTH2 spade connector locations Disconnect LTH2 Disconnect LTH1 5. Using a standard screwdriver, remove the 2 mounting screws. See Figure 299. -317