Figure 302: Removing the Z stage panel 6. Remove the 4 Z motor energy chain mounting screws with a 3 ⁄ 32 ” allen wrench. See Figure 303. 7. Cut the tie wraps holding from around Z stage energy chain. See Figure 303. Figure 303: Remove the Z motor energy chain Remove the 2 mounting screws Cut the wire tie Remove the 2 mounting screws Cut the wire tie 8. Loosen but do not remove the Z stage leadscrew mounting bracket set screws using a 9 ⁄ 64 ” allen wrench. See Figure 304. -322