Figure 328: Measuring distances from outside edges of F and G 15. Measure and record the diameter of circle F along the center line between E and G. See Figure 329 Figure 329: Measuring diameter of circle F 16. Add the lengths derived from steps 14 and 15 (E-F and F-G) and then subtract the width of circle F derived from step 16. Record this total as “GRear” 17. Measure and record the distance from the outside edges of circles C and G. Ensure the caliper is not seated on the small bump of circles C or G. Record this total as “GRight”, see Figure 330 -346