Figure 342: Measuring distances from outside edges of E and F 15. Measure and record the distance from the outside edges of circles F and G. Ensure the caliper is not seated on the small bump of circle G. See Figure 343 Figure 343: Measuring distances from outside edges of F and G 16. Measure and record the diameter of circle F along the center line between E and G. See Figure 344 Figure 344: Measuring diameter of circle F 17. Add the lengths derived from steps 14 and 15 (E-F and F-G) and then subtract the width of circle F derived from step 16. Record this total as “Rear” 18. Measure and record the distance from the outside edges of circles C and G.
Ensure the caliper is not seated on the small bump of circles C or G. Record this total as “Right”, see Figure 345 -354