Figure 339: Measuring diameter of B 11. Next measure and record the distance from the outside edges of circle A and B, see Figure 340 Ensure that the caliper is not seated on the small bump of circle A. Figure 340: Measuring distance from outside edges of A and B 12. Next measure and record the distance from the outside edges of circle B and C, see Figure 341 Ensure that the caliper is not seated on the small bump of circle C. Figure 341: Measuring distance from outside edges of B and C 13. Add the lengths derived from steps 5 and 6 (A-B and B-C) and then sub- tract the width of circle B. Record this total as “Front” 14.
Measure and record the distance from the outside edges of circles E and F. Ensure the caliper is not seated on the small bump of circle E. See Fig- ure 342 -353