Position and Temperatures Versions Travel Limits If the box is checked the switch is tripped. NOTE: It is suggested, that due to the time required to display switch state changes, that you use the LEDs on the PDB to verify switch operations. -426 Current Position The current X, Y and Z position in micro steps. X and Y = 16000 micro-steps per inch. Z = 128000 micro-steps per inch. Current / Total Layers The current build layer and the total number of layers in the model Current Curve The current curve (toolpath) number of the model Current Vertex The current vertex (series of connected points) number of the model. Head Temp The actual head temperature and its set point in C.
Head PWM The pulse width modulation value 0 = off / 255 = 100% Support Temp The support liquefier temperature and its set point in C. Support PWM The pulse width modulation value 0 = off / 255 = 100% Chamber Temp The actual chamber temperature and its set point in C. Product Version The current version number for the complete firmware release Build Version The build number for current firmware Firmware Version The current version for the firmware. PLD Version The current version of the programmable logic devices on the controller board. Product serial number The serial number of the complete system.
X home The X axis home limit switch state X Limit The X axis end of travel limit switch state Y Home The Y axis home limit switch state Y Limit The Y axis end of travel limit switch state Z Home The Z axis home limit switch state Z Limit The Z axis end of travel limit switch state Z Jam The Z jam encoder switch state Z Foam The Z top of foam switch state.