HP — Adjusting XY Tip Offset

Material Door Setting the Serial Number To set the printer serial number enter the serial number in the "Product Serial Number" field and click on the green check mark. The serial number displayed in this field is the current serial number of the product. Materials Every spool has a SmartSpool EEPROM attached that tracks information about the material remaining on the spool. The following information is provided for each spool: Adjusting XY Tip Offset See “Offset Calibrations” on page 338. -427 Model Latched The model material cartridge latch state Model in Head The state of the modeling material in the printer.

True = material moved out of cartridge False = material not moved out of cartridge. Support Latched The support material cartridge latch state. Support in Head The state of the support material in the printer. True = material moved out of the cartridge. False = material not moved out of the cartridge Door Latched The state of the door latch solenoid Door Open The state of the door switch Serial Number This is a unique number assigned to each spool. Material Type This is the type of material on the spool. For example: P430 - is a standard modeling material SR30 - is a standard soluble release material.

Manufacturing Lot This is a lot code used by Stratasys to control the manufacturing process. Manufacturing Date This is the date that the spool was manufactured. Use Date This is the date that the spool was first inserted in a printer. Initial Quantity This is the amount of material that was on the spool initially. Current Quantity This is the amount of material currently on the spool.