HP — Temperature Limits

Gantry The gantry controls the adjustment for the XY gantry. These values are set in the factory and do not need to be adjusted unless the XY gantry is adjusted or replaced where part based calibration is required. See “Part Based Calibration” on page 343. Temperatures The temperature control dialog allows you to adjust the set points for the head and chamber temperatures, for both modeling and at standby. These are set at the factory and should only be changed if noted to be incorrect. Standby Set Point 100 ◦ C 100 ◦ C 77 ◦ C Temperature Limits Max 333 333 77 -428 Temperature Building Set Point Head 310◦ C Support 310◦ C Chamber 77◦ C Temperature Min. Head 89.5 Support 89.5 Chamber 40