HP — Connecting with Tera Term

Figure 437: Setup Serial Port 9. From the Baud Rate: pull-down menu select 38400 , see Figure 438 10. From the Flow Control: pull-down menu select hardware , see Figure 438 11. The rest of the settings should default to the correct values. Click OK , see Figure 438 Figure 438: Serial Port Setup 12. The connection should now be established. A. To test the connection, type ss and press the Enter key. "Information should post on the screen if the connection was successful. NOTE: "If text does not appear in Tera Term you may have the wrong COM Port selected, there may be an issue with the Null Modem Cable or there may be an issue with the USB to serial converter. -433